|
|
|
|
|
| Three phases stepping driver |
|
|
|
|
| Name: |
YKB3606MA |
| Features |
| YKB3606MA(B) is a constant torque driver with microstep. Single power supply, voltage range from DC16-60V. can match three phase hybrid step motors whose rated current under 5.8A,flange size range from 42-86mm. This driver use bipolar constant current chopper control and runs smoothly, hardly has any noise. High voltage input makes it possible to enhance the motor speed and output torque. Further more, if the pulse output stops for 100ms, phase current will be automatically cut by half, which prevents the motor from overheat. By microstep setting, resolution of the motor can be enhanced. The microstep can be set to 60000pulse/rev. |
|
|
|
|
 |
|
|
|
Feature:
- High performance, low price;
- Provides 16 kinds microstep selection,resolution can be set to 60000pulse/rev.
- Once the pulse stops for 100ms,phase current automatically reduce to a half.
- Bipolar constant current chopper control.
- Photocoupler isolated input/output.
- Adjustable drive current range from 0.2A-5.8A;
- Single power input, voltage range from DC16-60V;
- The upmost pulse response frequence amounts to 200Kpps.
- Overheat protection&Overcurrent, under voltage protection.
- Dimension: 25x136x92mm3 ,Net Weight:0.3kg.
YKB3606MA/B Microstep Setting
Terminal Assignment
Running current setting Installation dimensions(mm)
 
Function setting Input signal timing diagram
 
Driver Connection
Caution
1. Do not reverse the power input,input voltage should not exceed DC60V。
2. Input logic should be 5V，otherwise it should connect a resistor
3. O.H is malfunction indicator. Once the driver temperature exceeds 70°C,the current will be cut off automatically and the driver will resume working till the temperature drops to 50°C. If this happens,please install ventilation equipment.
4. Once over current (short circuit)/under voltage occur, LED O.C lights, please shut off power and check the electricity circuit to solve the problem, then restore power supply.
5. PWR is power indicator,it lights when power on.
6. Passing the origin or there is pulse output, TM LED lights.
|
|
Download Manual
|
| [Back] |
|
|
