Feature:

• High performance, low price;
• Special circuit design,reduce noise, enhance steadiness.
• Once the pulse stops for 100ms,phase current will automatically cut by half.
• Bipolar constant current chopper control;
• Photocoupler isolated input/output;
• Adjustable phase current range from 0.0A-6.0A;
• Single power input, voltage range from DC24-80V;
• The upmost pulse response frequence amounts to 50Kpps;
• Overheat protection&Overcurrent,under voltage protection;
• Dimension:45x136x92mm3 ;Net Weight:0.5kg.

YKA2608S Microstep Setting List

Terminal Assignment

Running current setting                                                                                Installation dimensions(mm)

Function setting                                                  Input signal timing diagram

Driver Connection

Caution

1. Do not reverse the power input,input voltage should not exceed DC40V。
2. Input logic should be 5V，otherwise it should connect a resistor
3.Due to the special control circuit, this module only for 6 leads or 8 leads step motors.
4. O.H is malfunction indicator. Once the driver temperature exceeds 70°C,the current will be cut off automatically and the driver will resume working till the temperature drops to 50°C. If this happens,please install ventilation equipment.
5. Once over current (short circuit)/under voltage occur, LED O.C lights, please shut off power and check the electricity circuit to solve the problem, then restore power supply
6. PWR is power indicator，it lights when power on
7. Passing the origin or there is pulse output, TM LED lights